HomeTechHow To Fix: This Program Is Blocked By Group Policy

How To Fix: This Program Is Blocked By Group Policy

Getting your Program stuck at any point while launching it is quite irritating, or are you exhausted by this program is blocked by group policy right? Don’t worry! It’s the last time you are facing this error, Trust Me.

Support forums are almost filled with such issues, where many users reporting that the application or the program they are trying to launch on their Windows 7/8/10 shows an error message “This program is blocked by group policy. For more information, contact your system administrator.”

Let us first be clear about- What’s Group Policy? It’s actually a nifty little Windows utility designed for network administrators. Which is used to deploy users’ different security protections and also networking policies on a very wide range of computer networks at the individual machine level.

Well, looking at the number of users facing this issue we can say it continues to be a problem for large numbers of Windows 7/8/10 users currently. And the worst part is that it can affect a wide range of applications and programs on your computer if not fixed.

To help you fix the “This program is blocked by group policy” issue, we have prepared this complete guide listing out everything that you should know about this error and fix it permanently.


Fix: This Program Is Blocked By Group Policy

What Causes The “This Program Is Blocked By Group Policy” Issue?

The actual cause of this error in almost all cases is quite the same when the affected user enables the Software Restriction Policy and ignores everything about the bug.

However, after an in-depth investigation, we found that this issue to your program can also be caused by-

A third-party security program.

Blocking certain applications from running or launching.

It’s almost the same reason why you are getting the “Windows Defender This program is blocked by group policy” error message.

Windows Defender detects any other installed antivirus program or an anti-hacking tool showing some incompatibility with the built-in Microsoft’s Antivirus and throws this alert note.

Well, we think there’s no other possible cause left to mention, which causes this issue. Now, it’s time to check out some best and effective solutions from a wide range of available choices to give a quick and permanent fix.

So, here’s what you are looking for-

How Do I Fix Group Policy?

There are a number of solutions available on the web claiming to fix this issue within seconds. But honestly speaking, very few of them are effective and proven.

After a deep investigation, we came up with the 3 most common and yes most effective fixes to this group policy error. These are-

Fix 1: Disable Your Software Restriction Policy:


How do I fix group policy?

This is the most common and effective method to fix “group policy” error, where a number of users on different support forms give this method a green light.

Using this method can simply fix your group policy error and all you have to do is to disable your Software Restriction Policy using a .BAT file.

To do this, just follow the below steps-

  1. First, click on the Windows button on your home screen and open a fresh new instance of Notepad.
  2. Now, you have to input a command here. Just copy the below text and paste it into the blank instance of Notepad:

REG ADD HKLM\SOFTWARE\Policies\Microsoft\Windows\Safer\CodeIdentifiers\ /v DefaultLevel /t REG_DWORD /d 0x00040000 /f

  1. This needs to be saved now, press Ctrl + S to save the document.
  1. You will be asked where you want to save this file, navigate to your desired location and keep the track in mind.
  1. Now, a dropdown menu will open when you choose the Save as type and select All Files.
  1. You will be asked to input a file name, no matter what file name you enter, just make sure you end with a .BAT extension. For example- fix.bat.
  1. After this, click on the “Save” button.
  1. As we said, to keep the location track in mind, navigate to the .BAT file location and simply double-click on it to launch.
  1. There might be a pop-up asking for confirmation action, simply confirm it.
  1. On double-tap the .BAT file will launch a Command Prompt and the command programmed into it will simply get executed. It will hardly take a few seconds even when you have the slowest processor of all time.
  1. As soon as the. BAT file is done with the launch process and successfully runs the command in the Command Prompt, it will automatically get closed. Lastly, you have to Restart your system.

After a successful Reboot, try to launch the affected application or the applications. They will successfully launch and the group policy issue blocking the program and application to launch will be kicked out from the system.

Fix 2: Delete All Configured Group Policies Using The Registry Editor:

When the above-listed method fails, you can try this one out. As you know whenever a group policy is configured on a network, a number of registry values are added to the registries of every single computer for the created group.


This program is blocked by Group Policy gpedit

Well, you can also say this is true in the case of the Software Restriction Policy. It’s. because this is the reason why you can disable the Software Restriction Policy by using the Registry Editor. Using the Registry Editor you can delete any and even all configured group policies.

To do this, just have a look at the steps below-

  1. First, you have to press the Windows key + R on your keyboard to open a Run dialogue.
  1. After this, type “Re-edit” into the Run dialogue and then simply press Enter. This will launch the Registry Editor.
  1. Now, here you have to navigate and delete four directories. These are-
  1. In the left pane of your Registry Editor, you have to navigate the following directory first:-

HKEY_LOCAL_MACHINE > Software > Policies

Again, in the left pane, look for Microsoft subkey under the Policies registry key and simply right-click on it. A menu will pop up, from the context menu click on the Delete option and then select “Yes” in the popup to confirm your action.

  1. In the left pane of your Registry Editor, this time you have to navigate the following directory:

HKEY_CURRENT_USER > Software > Policies

Similarly, in the left pane, you now have to look for Microsoft subkey under the Policies registry key. Simply, right-click on it to open the context menu. From the menu popped select the Delete option and then confirm your action with “Yes” in the resulting popup.

  1. Navigate to the following directory in the left pane of your Registry Editor:

HKEY_CURRENT_USER > Software > Microsoft > Windows > Current Version

Under the CurrentVersion registry key, find and right-click on the Group Policy Objects sub-key, in the left pane of your Registry Editor. Select the “Delete” option from the context menu and then choose “Yes” in the pop-up to confirm your action.

  1. Navigate to the below directory, in the left pane of your Registry Editor Window-

HKEY_CURRENT_USER > Software > Microsoft > Windows > Current Version

Again in the same manner, under the CurrentVersion, register key find and right-click on the Policies sub-key. From the context menu select the “Delete” option and confirm your action with a “Yes” in the pop-up.

Lastly, close the Registry Editor and Reboot your system.

The Result-

After a successful Reboot, your computer’s Software Restriction Policy will no longer be in effect even if it was in the enabled state. You better know what it means, you can now launch and run all your affected programs successfully.

Note: When you find that while attempting this solution, you are missing one of the registry keys that have to be deleted, simply ignore it and move to the next one.

Fix 3: Disabling The Symantec Endpoint Protection’s Program-blocking Functionality-


This program is blocked by group policy Microsoft Store

When the above two methods fail, you can simply try this one out. You might not be aware of your Symantec Endpoint Protection full functionality, where it comes with an advanced option to block all running programs on removable drives.

As reported by a large number of users on the support forums, when they have this option enabled they usually face a “This program is blocked by group policy” error message more frequently while launching any blocked application for the program.

But, there’s Good News! You can easily fix this issue by simply disabling the Symantec Endpoint Protection’s program-blocking feature in the application control.

Let’s make this more simple. Here’s how you can do this-

  1. First, you have to launch your Symantec Endpoint Protection Manager.
  1. After this, look for the program’s Application and Device Control and then simply step into it.
  1. Click on the “Application Control” option present on the left pane of the opened Application and Device Control window.
  1. Now, you have to make sure that the checkbox present right beside the “Block programs from running from removable drives (AC2) Application Control policy” is not marked enabled means no green tick.
  1. In case you find that the checkbox is checked then it simply means the policy is enabled. Remove the green tick (uncheck) and turn it disable.
  1. Don’t forget to “Save” your final changes.
  1. Done! You have successfully disabled your Symantec Endpoint Protection program-blocking feature from the Manager. Now, close the Manger and restart your computer.

Rebooting your computer will bring all changes into effect. After restarting, check whether the issue is resolved or not.

Note: As we said earlier this solution is only for those users who have Symantec Endpoint Protection already installed on their system and facing this error.

Now, let’s have a look at some common questions that users usually ask regarding this group policy error-

FAQs-

How do I Get Rid Of The “This Program Is Blocked By Group Policy Microsoft Store” Issue?


this program is blocked by group policy

Well, there are many solutions present over the web to get rid of this group policy error by Microsoft Store. But among these available choices, we have selected some best and most effective ones with a very high success rate. Here are they-

Using your Group Policy Editor, Enable Microsoft Store.

  • Clear your Microsoft Store app Cache.
  • Start Running Windows Store Apps Troubleshooter.
  • Reset your Microsoft Store app to default.
  • Using PowerShell re-register on Microsoft Store.
  • Check it with a new account profile.

How To Fix the “This program Is Blocked By Group Policy edit” error?

Similar to group policy error, there might occur a situation where you have to face the group policy editor issue. Don’t worry, fixing this isn’t that tough, just start trying these methods one by one-

  1. Right-click on the Bat file and then select the “Run as Administrator” option.
  2. Have hold and wait until the commands get completed.
  3. Press any button on the keyboard, to close the command prompt window.
  4. Restart your system.

How To Change My Group Policy To Default?

You must be knowing that all policies in the Group Policy Editor are already set to “Not Configured” by default. If you notice any change in setting or wish to have a cross-check by resetting the policy back to default, just select the radio button “Not Configured” and press the “OK” button to finalize your choice.

How To Fix “Can’t Sign In, With a Microsoft Account, This Program Is Blocked By Group Policy”?

To fix this issue we have a quick and easy method. Just follow these steps carefully in the order they are listed-

  1. First, click on the “Start” button.
  2. From the popped menu select “Settings.”
  3. Look for the “Privacy” option, then tap it.
  4. You will be having a small menu pop up, from these select “Feedback and diagnostics.”
  5. Now, navigate to the following key: HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\DataCollection.
  6. Lastly, select Disabled and then choose the “3-Full” option from the drop-down menu.

How Can I Remove “This App Has Been Blocked By Your System Administrator”?

To kick this issue out of your system we have the four most effective ways with maximum green flags. Here are these methods-

  • Disabling Your Windows SmartScreen Functionality.
  • Using The Command Prompt Try To Run The File.
  • By Using The Hidden Administrator Account.
  • Check Out Your System Antivirus.

fix Group Policy edit

Final Words-

Group policy as we said is a nifty little Windows utility for network administrators to deploy user different security and other network long policies. But sometimes your app or program gets stuck with a “This program is blocked by group policy” error note.

We hope this guide was with all that you were looking for. Almost covering everything related to this group policy issue and answering the most asked question “How do I fix group policy?” in a very short and simple way.

Read Also- How To Fix Error Code 0x80042405 – 0xa001a – The Best Solution

RELATED ARTICLES

Leave a reply

Please enter your comment!
Please enter your name here

Most Popular

Recent Comments